FBE-ESP-FIREBEAM-XTRA User Guide

NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972 FIREbeam Xtra User Manual 22 2-3-0-2700/ISS2/21.OCT19 70KIT140 Mid-Range Reflector Kit 70 to 140 metres 140KIT160 Long Range Reflector Kit 140 to 160 metres Alarm Sensitivity Levels 25% (1.25 dB) to 50% (3 dB) in 1% (0.05 dB) increments (default 35% (1.87 dB)) Alarm Condition Obscuration drops to below pre-defined sensitivity level. Time to Alarm Condition adjustable 2 to 30 seconds in 1 second increments (default 10 seconds) Alarm Indication Controller Status – FIRE, Controller Red Flashing LED, Head Red Flashing LED, Alarm Relay Change Over (CO) Contact Rating 2 A @ 30 VDC Test/Reset Features Beam test function by controller. Alarm latching/auto-reset selectable (default auto-reset). Alarm reset in latching mode by controller reset function, removing power for >5 seconds, apply >5 VDC to reset connections in Beam Head. Fault Sensitivity Level 4% Fault Condition Obscuration drops to below the fault sensitivity level within 1 second Power Down or Supply Voltage < 9 VDC. Commissioning modes, Pre-Alignment and Auto Alignment. Beam turned off during Beam Maintenance. Time to Fault Condition adjustable, 2 to 60 seconds in 1 second increments (default 10 seconds) Fault Indication Controller Status – FAULT, Controller Yellow Flashing LED 1 Second, Head Yellow Flashing LED 1 Second, Fault Relay Change Over (CO) Contact Rating 2A @ 30 VDC Normal Condition Obscuration level is above the Alarm sensitivity level, Controller Status – NORMAL, Controller Green Flashing LED, Programmable on/off, Head Green Flashing LED Programmable on/off Auto-align/Beam Contamination Compensation Auto-align during normal operation if obscuration drops below 90% for the duration of the align time set (doesn’t affect normal operating mode) Beam Contamination Compensation 4-hour monitoring. Compensation data available at the controller