FBE-ESP-FIREBEAM-XTRA User Guide

NSW 02 9644 7144 QLD 07 3252 5366 VIC 03 9544 2211 WA 08 9349 2972 FIREbeam Xtra User Manual 2-3-0-2700/ISS2/21.OCT19 11 Ensure 1m of clear space along the path of the beam and 500mm from the edges of the reflector. if the wall you are placing the reflector/s on is shiny or glass then the reflectors should be placed on a 1meter piece of non-reflective material like MDF to ensure correct operation. Stage Three – Manual Alignment Once Pre-Alignment is complete you will enter Manual Alignment. Now place or uncover the reflector. When you install or uncover the reflector the right-hand Figure (AQ) will jump up as high as 135%, this clearly shows that the beam can see the reflector and you can press Enter to move to Auto Alignment.  If there is a received signal of at least 80 to 100% ideally over 100%, you can move onto the next stage, Auto Alignment. If the beam AQ does not rise significantly you will need to use the Left, Right, Up and Down keys to move the Eyes of beam onto the reflector. Once you have targeted the beam onto the reflector, the AQ will rise significantly.  In the example below, we can see that the reflector is below the eye line of the beam head, so in this case you would need to lower the angle of the beam (-Y) until you receive an AQ of over 100%.